Metal Fabricator

Tailor Your Resume for this Job

About the Position

Ascension Automation Solutions is looking for a skilled and motivated Metal Fabricator to join our team.

This is a fabrication and fitting position — not a welding-only position. Strong fitting ability is a must-have. The successful candidate will be responsible for reading drawings, measuring, laying out, cutting, fitting, assembling, and welding custom components and structures to precise specifications.

The majority of the work is completed independently, and the ability to accurately interpret drawings, determine dimensions, fit components together, and produce quality fabricated parts is essential. Welding is an important part of the position, but candidates must be comfortable and experienced with the complete fabrication process from measurement and layout through fitting, assembly, and final welding.

Qualifications and Core Skills

• Minimum 3 years of custom fabrication and fitting experience required
• Strong metal fitting and layout ability is required
• Ability to accurately measure, fit, align, tack, and assemble components before final welding
• Ability to read and interpret engineering drawings, blueprints, sketches, and fabrication plans
• Minimum 3 years of MIG and Stick welding experience required; TIG welding is an asset
• Current CWB welding ticket(s) considered an asset
• Ability to properly use precision measuring tools and equipment to take accurate measurements
• Solid knowledge of the properties and characteristics of various metals and other materials
• Ability to determine appropriate materials, dimensions, tolerances, and fabrication methods from drawings and specifications
• Ability to identify and correct fit-up, measurement, alignment, and fabrication issues
• Strong mathematical and analytical skills
• Strong troubleshooting and problem-solving skills
• Ability to work independently and in a team setting
• Ability to work closely with mechanical designers, welders, machinists, other trades, and supervisors to confirm measurements, calculations, fit-up, and fabrication requirements
• Ability to discuss work assignments with supervisors and clarify expectations before beginning work
• Excellent attention to detail and commitment to producing quality work
• Excellent time management skills
• Strong communication skills
• Flexible and adaptable as project requirements and timelines change

Roles and Responsibilities

The Metal Fabricator will be responsible for producing custom parts, assemblies, frames, guards, and other fabricated components while working from accurate measurements, drawings, specifications, and instructions.

A strong candidate will demonstrate the ability to:

• Review drawings, blueprints, sketches, instructions, and sample parts to understand project specifications
• Measure, mark, lay out, cut, and prepare materials for fabrication
• Fit and assemble components accurately prior to welding
• Interpret drawings and determine appropriate dimensions, angles, clearances, and fit-up requirements
• Use fabrication and fitting techniques to ensure components are properly aligned, square, level, and positioned
• Plan and organize the sequence of work required to complete a project efficiently
• Select and set up appropriate fabrication equipment and machinery
• Operate various fabrication equipment, including saws, grinders, drills, cutting equipment, and other hand and power tools
• Perform MIG and Stick welding as required; TIG welding is an asset
• Tack and weld fabricated components while maintaining proper alignment and dimensions
• Perform quality control on completed pieces to ensure they meet drawings, specifications, and required tolerances
• Work from sketches, prints, operation sheets, preliminary drawings, and written or verbal instructions
• Identify and troubleshoot fabrication, fit-up, dimensional, and welding issues
• Make adjustments and corrections as required to achieve proper fit and finished dimensions
• Maintain a clean, organized, and safe work area
• Perform routine maintenance and inspections of fabrication equipment
• Follow all company Health and Safety policies and procedures
• Work collaboratively with other trades and departments when required

Important – What We Are Looking For

The successful candidate must have strong hands-on fitting and fabrication skills. This position is not intended for someone whose experience is primarily limited to welding.

Candidates should be comfortable taking a drawing or sketch and independently working through the fabrication process, including:

Read drawing → Measure → Layout → Cut → Fit → Align → Tack → Weld → Inspect

The ability to accurately fit and assemble components before welding is a key requirement of this position.

Work Conditions

• Ability to stand for extended periods
• Ability to physically lift up to 50 lbs
• Ability to work with metal, fabrication equipment, hand tools, and power tools
• Overtime as required
• Weekend work may be required
• Work is performed in person at our Cambridge facility

Remuneration

As a progressive employer, Ascension Automation Solutions strives to offer competitive wages and vacation packages while supporting the continual growth and development of our employees.

Training for a variety of skills is available through internal and external training opportunities. Employee progress will be evaluated annually through performance reviews.

Starting wage rates will be determined based on skill and experience:

• Mid-Range: $24.00–$29.00/hour
• Senior: $30.00–$35.00/hour

About Us

Established in 2013, Ascension Automation Solutions is an expert in the field of industrial robotics, specializing in robotic manufacturing applications and providing everything from system design to machine commissioning.

We tackle a wide range of projects, including custom automation design and build, machine retrofits, automation integration, maintenance, and service. Our team is always up for a challenge — if you can think of it, we can do it.

Education and Experience

• Diploma or certification in Welding, Metal Fabrication, or a related trade is an asset
• Minimum 3 years of custom metal fabrication and fitting experience required
• Demonstrated hands-on fitting experience required
• Minimum 3 years of MIG / Stick welding experience required
• TIG welding experience is an asset
• Current CWB welding ticket(s) considered an asset
• Red Seal in Fabrication / Welding is an asset

Benefits

• Vacation, starting at 2 weeks for the first year
• Flex-time work schedule
• Training to support growth and development
• Dental care
• Disability insurance
• Extended health care
• Life insurance
• Vision care
• On-site parking
• Overtime pay

Requirements

Experience:

• Custom Fabrication & Fitting: 3 years (required)
• MIG / Stick Welding: 3 years (required)

Licence/Certification:

• CWB Welding Ticket (preferred)
• Red Seal in Fabrication / Welding (preferred)

Ability to commute/relocate:

• Cambridge, ON: reliably commute or plan to relocate before starting work (required)

Pay: $24.00-$35.00 per hour

Work Location: In person